Fireproof Paint – DC333
DC333 Fireproof Paint is produced by a new state of art fire retardant system using proprietary leading edge intumescent fire retardancy and fire resistance.
DC333 Fireproof Paint has been highly tested and has passed countless tests from nationally certified labs and testing facilities.
When exposed to high temperatures or direct flame, it expands, then caramelizing forming a “char barrier” that lifts off the surface, or on materials. In doing so, DC333 Fireproof Paint offers an effective and durable barrier that cuts off the fuel source that fire needs to develop and reduces smoke dramatically.
DC333 is best applied with an airless sprayer to achieve a more consi D stent mil thickness. In challenging areas where an airless sprayer is not pracÅcal, DC333 can be applied by brush or roller.
· Brush: Use top quality polyester/nylon blend brushes, such as those supplied by Purdy, Wooster, or equivalent
· Roller: Use a 3/8” polyester blend nap roller, which will generally work well when applying DC333
DC333 VISCOSITY: DC333 is a variable viscosity coaÅng. When you open DC333 the unmixed viscosity will be approximately 30,000 – 35,000 CPS. A!er mixing for five minutes the viscosity will drop 15,000 CPS to approximately 20,000 CPS. If viscosity is sÅll too high you can add 8 ounce of water per 5 gallon pail and mix to reduce the viscosity by 4000 – 5000 CPS.
– Coverage: DC333 MUST BE THOROUGHLY MIXED FOR 5 MINUTES PRIOR TO APPLICATION WITH A MECHANICAL MIXER Check appropriate test report or ESR for required wet film thickness (WFT) and gallon per square coverage. For example, if the wet film thickness (WFT) required is 18 mils, the coverage will be 89 sq. !. per gallon.
– Curing: Fans should be used to circulate air for the first 24 hours of curing. Do not blow air directly on coating.
Water Base
300 sq. ft. per Gallon as Class A
Non-Toxic
Hypoallergenic
Non-Carcinogenic
Passed Strict EPA – V.O.C. and AQMD
Spray, Roll, or Brush
Compa!ble with any paintable surface
Fireproof Paint – DC333
DC333 Fireproof Paint is produced by a new state of art fire retardant system using proprietary leading edge intumescent fire retardancy and fire resistance.
DC333 Fireproof Paint has been highly tested and has passed countless tests from nationally certified labs and testing facilities.
When exposed to high temperatures or direct flame, it expands, then caramelizing forming a “char barrier” that lifts off the surface, or on materials. In doing so, DC333 Fireproof Paint offers an effective and durable barrier that cuts off the fuel source that fire needs to develop and reduces smoke dramatically.
DC333 is best applied with an airless sprayer to achieve a more consi D stent mil thickness. In challenging areas where an airless sprayer is not pracÅcal, DC333 can be applied by brush or roller.
· Brush: Use top quality polyester/nylon blend brushes, such as those supplied by Purdy, Wooster, or equivalent
· Roller: Use a 3/8” polyester blend nap roller, which will generally work well when applying DC333
DC333 VISCOSITY: DC333 is a variable viscosity coaÅng. When you open DC333 the unmixed viscosity will be approximately 30,000 – 35,000 CPS. A!er mixing for five minutes the viscosity will drop 15,000 CPS to approximately 20,000 CPS. If viscosity is sÅll too high you can add 8 ounce of water per 5 gallon pail and mix to reduce the viscosity by 4000 – 5000 CPS.
– Coverage: DC333 MUST BE THOROUGHLY MIXED FOR 5 MINUTES PRIOR TO APPLICATION WITH A MECHANICAL MIXER Check appropriate test report or ESR for required wet film thickness (WFT) and gallon per square coverage. For example, if the wet film thickness (WFT) required is 18 mils, the coverage will be 89 sq. !. per gallon.
– Curing: Fans should be used to circulate air for the first 24 hours of curing. Do not blow air directly on coating.
Water Base
300 sq. ft. per Gallon as Class A
Non-Toxic
Hypoallergenic
Non-Carcinogenic
Passed Strict EPA – V.O.C. and AQMD
Spray, Roll, or Brush
Compa!ble with any paintable surface
