Firestop Sheet – FP-04+
FP-04+ is an industry leading Firestop Sheet fabricated by bonding proprietary intumescent materials to a metal sheet. FP04+ securely blocks flame and is designed to seal large penetrations through fire-rated walls and floors. It is also used for shielding cable trays, conduit, HVAC and vital process equipment from radiant heat, flame spread and smoke.
FP-04+ Firestop Sheet is thinner than our FP-02, providing a more cost effective solution for double-sided applications such as walls. It is easily re-penetrable and repairable with a common hole saw and can easily be trimmed to different sizes to fit any installation or large openings, working with nearly all construction materials. It is halogen and asbestos free, is very stable and maintenance free.
Meets the intent of LEEDS® VOC environmental air quality requirements.
1. Refer to applicable certification directory or www.paintoprotect.com for listed assemblies.
2.Ensure application area is clean an d free of oil, loo se dirt, rust or scale.
3. When max opening dimensions exceed 20 in. (508mm) in both width and length, two minimum 2 x 2 in. (51 by 51 mm) by No.10 gauge galvanized steel angles shall be installed within the longest dimension of the opening, with one angle flush with both top and bottom of floor or both sur- faces of wall. These angles provide a framing member for intermediate securement of the firestop sheet at both surfaces of opening.
4. Cut sheet to an overall rectangular size such that it overlaps the floor or wall around the periphery of the opening according to Listed system. Cut sheet to fit the contour of the through penetrants within the opening.
5.Apply a min 3/8 in. (10 mm) thickness of INSS1440 around the periphery of each firestop sheet prior to securing it to the floor or wall. In addition, min 3/8 in. (10 mm) bead of sealant applied at the periphery of the through penetrant/firestop sheet interface on both sides of t he floor or wall.
6. Install firestop sheet with intumescent bonded layer exposed, install sheet on both surface of wall or floor opening as per lis ted system.
7.Secure sheet to wall of floor surface using the require number and spacing of fasteners as detailed in the Listed system.
Size: 90 cm x 90 cm
Thickness: 2 mm
Weight : 5.6 Kgs/Sheet
Expansion rate: 10 Times
In-Service Temp: -13° F – 176° F (-25° C – 80° C)
Packaging: Single sheet
Largest Listed opening: up to 74 square feet
Performance: 50+ years HOAC tested
Firestop Sheet – FP-04+
FP-04+ is an industry leading Firestop Sheet fabricated by bonding proprietary intumescent materials to a metal sheet. FP04+ securely blocks flame and is designed to seal large penetrations through fire-rated walls and floors. It is also used for shielding cable trays, conduit, HVAC and vital process equipment from radiant heat, flame spread and smoke.
FP-04+ Firestop Sheet is thinner than our FP-02, providing a more cost effective solution for double-sided applications such as walls. It is easily re-penetrable and repairable with a common hole saw and can easily be trimmed to different sizes to fit any installation or large openings, working with nearly all construction materials. It is halogen and asbestos free, is very stable and maintenance free.
Meets the intent of LEEDS® VOC environmental air quality requirements.
1. Refer to applicable certification directory or www.paintoprotect.com for listed assemblies.
2.Ensure application area is clean an d free of oil, loo se dirt, rust or scale.
3. When max opening dimensions exceed 20 in. (508mm) in both width and length, two minimum 2 x 2 in. (51 by 51 mm) by No.10 gauge galvanized steel angles shall be installed within the longest dimension of the opening, with one angle flush with both top and bottom of floor or both sur- faces of wall. These angles provide a framing member for intermediate securement of the firestop sheet at both surfaces of opening.
4. Cut sheet to an overall rectangular size such that it overlaps the floor or wall around the periphery of the opening according to Listed system. Cut sheet to fit the contour of the through penetrants within the opening.
5.Apply a min 3/8 in. (10 mm) thickness of INSS1440 around the periphery of each firestop sheet prior to securing it to the floor or wall. In addition, min 3/8 in. (10 mm) bead of sealant applied at the periphery of the through penetrant/firestop sheet interface on both sides of t he floor or wall.
6. Install firestop sheet with intumescent bonded layer exposed, install sheet on both surface of wall or floor opening as per lis ted system.
7.Secure sheet to wall of floor surface using the require number and spacing of fasteners as detailed in the Listed system.
Size: 90 cm x 90 cm
Thickness: 2 mm
Weight : 5.6 Kgs/Sheet
Expansion rate: 10 Times
In-Service Temp: -13° F – 176° F (-25° C – 80° C)
Packaging: Single sheet
Largest Listed opening: up to 74 square feet
Performance: 50+ years HOAC tested